Lighting fixture with round cross-section
Minimum cross-section diameter
Smooth profile surfaces
Continuous Adjustable lighting angle possible
Small bending radius
- decorative and functional lighting.
- suspended, using dedicated accessories ,
- the cover is cut to the length of the profile,
- easy assembly and disassembly by snapping in and out.
- the lighting fixture is 360 degrees rotatable when coupled withPIKO-O conductive end caps
- PIKO-O is compatible with 5 mm wide LED strips. The PIKO-O profile is available as silver anode and black anode
- maximum deflection of the PIKO-O profile at a length of:
- 3 m is 45 mm
- 2 m is 25 mm
- 1.75 m is 15 mm
- 1.50 m is 10 mm
- 1.20 m is 5 mm
- 1 m is 2 mm
- space for LED strip: 6.2 mm
The PIKO-O conductive end cap is designed for single-pole conductivity.
The maximum forward current for the PIKO-O conductive end cap is 2 A.
Profile bending with LUK-10 cover
Minimum internal radius: 150 mm
Minimum external radius: 1000 mm
- minimum radius - bending radius which when exceeded causes destruction (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile
- internal radius - refers to the profile bent so that the cover is facing the inside of the arch - external radius
- refers to the profile bent so that the cover is facing the outside of the arch
- irregular curves are possible after consultation and individual quotation
- when bending anodized profiles, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius).