Vil du gerne have besked når der sker nye ting hos Danmind?
Så kan du tilmelde dig vores nyhedsbrev ved at indtaste din email-adresse, fornavn og firma navn – så skal vi nok sørge for at sende dig en mail når vi har noget spændende at fortælle.
The information contained in the description applies to the MOD-KOL-100
system (a set of RAM-KOL-100, OMODO-100 profiles).
Wall-to-wall mounting possible
Openwork structure of the Mounting track
Adjustable elements of the mounting track
Mounting to drywall boards
Hardly visible aluminum elements
Glare rating UGR <19 possible
High lumen output
|Dimensions||107 × 36 mm|
- main and decorative lighting.
- in drywall, using a dedicated mounting track and dedicated accessories,
- can be easily connected into runs,
- the cover is cut to the length of the profile.
MOD-KOL-100 fixtures are designed for 7 LED tapes (10 mm wide) or 8 tapes (8 mm wide) or two current modules up to 24 mm wide.
The lighting fixture is designed so that the "core" of the lighting fixture (profile with LED tapes, power supply, wires and end caps) can be prepared in advance, in factory conditions. The only thing to be done at the installation site is to insert the prepared "core" (OMODO-100) into the pre-installed mounting channel (RAM-KOL-100).
Two locking bolts must be used for every 1 m of lighting fixture. For lighting fixtures shorter than 1 m, at least 2 bolts must be used.
The width of the gap in the drywall for RAM-KOL-100: from 108 mm to 113 mm.
The following are examples of covers are compatible with MOD-KOL-100:
- JUN-100 prismatic material: PMMA, length: 1.5 m, UV resistant, glare rating UGR ≤ 19 possible,
- POL-100 frosted, material: PC, lengths: 1 m, 2 m, 3 m, UV resistant.
The gaps between the edges of the mounting channel and the “core” of the fixture can be finished with a dedicated silicone cord.
Animation: Profile system MOD-KOL-50
Scheme: Profile system MOD-KOL-100